Plastic Injection Front And Rear Bumper Mould

Description

The car bumper is one of the most important appearance parts of the car. It must not only have sufficient strength and rigidity, but also play a buffering role in the collision of the car to protect the car body. It also pursues harmony and unity with the car body shape. In order to achieve this goal, the body of the bumper of the car is currently made of plastic and injection molded by Plastic Injection Front and Rear Bumper Mould.

Parameter

Advantages

The Plastic Injection Front and Rear Bumper Mould uses an internal parting surface that passes through the hot runner and is controlled by a sequence valve. The reverse buckle on both sides adopts a structure with a large inclined top cover and a horizontal inclined top and a straight top. The advantage is that the parting clip line is hidden on the non-appearing surface of the bumper, and can not be seen after assembly on the automobile, and does not affect the appearance.

In addition, the plastic part has a large number of through holes, and some areas are still large. The venting groove and the escaping groove are designed at the impacting point, and the insertion angle is greater than 7 °, which can increase the service life of the mold and is not easy to generate flash.