Description
The grid parting line is more complicated, and the parting surface needs to be designed according to certain rules. It is not free to avoid problems with Auto Body Bumper Grille Mould for Aftermarket. The draft angle at the product grid is usually not large, so it should be verified according to the surface treatment requirements during design. If the front and rear molds of the product have reinforcement positions, it is necessary to focus on verifying the respective draft angles of the front and rear molds. Generally, the front molds are larger than the rear molds to avoid leaving the front molds.
Parameter
Auto Body Bumper Grille Mould For Aftermarket |
|||
Core/Cavity Steel |
2738 |
||
Mould Base |
LKM |
||
Mould size |
1050*750*900 |
||
Cavity |
1 |
||
Injection System |
Hot Runner |
||
Mould Life |
500,000 shots |
||
Plastic material |
PP |
||
Design Software |
NX Siemens, PROE, Cimatron, Solidwork,Catia and Auto-CAD |
||
Delivery Time |
90 days |
||
Payment |
By T/T |
Auto Body Bumper Grille Mould for Aftermarket is large in size, and the rear mold has more flat tops or small diameter thimbles. It is difficult to process, so it needs to be inlaid. And has the following advantages:
A) Only the inner mold uses good materials, and the overall material cost is reduced;
B) The small shape of the flat top or small thimble hole on the insert is easy to process;
C) NC, EDM, etc. can use smaller machine tools, and the choice is large, and the cost is reduced.