Plastic Mould For Paint Bucket

Description

Plastic Mould for Paint Bucket is of high quality and has the advantages of fast forming speed, short cycle and low scrap rate. The mold adopts a separate clamping system. At the same time, high-speed injection molding can effectively ensure that the mold height clamping does not produce flash.

Parameter

Reason for uneven wall thickness

1. If the cooling water flows unevenly in various areas of the core cavity of the Plastic Mould for Paint Bucket, it will cause a difference in the flow of the molten plastic. The hotter area will be more fluid, and the colder area will be less fluid, making the barrel wall thicker in the hot zone. Under normal conditions, different temperatures will cause at least a tolerance of 0.05mm.

2. In general, the plastic Mould for Paint Bucket's zero-four-gram lock height should be 20%-30% of the height of the plastic bucket, for example, the smaller bucket should be 20%, and the larger bucket mold should be about 30%.